The PT-571 HDMI over Twisted Pair Transmitter converts an HDMI signal to a single twisted pair signal. When coupled with a PT-572 receiver, the unit allows transmission of signals up to a distance of 330’ (100m) via STP (shielded twisted pair) cables. It offers data rates up to 1.65Gbps, and is compatible with HDTV, HDCP, HDMI, and 3D signals. The unit allows transfer of EDID and HDCP signals from source to display.
With LED status lights, the unit indicates the detection of input signals and transmission of output signals. The transmitter powers the receiver via a single connection. Being compact (2.4 x 2.1 x 1" / 6.2 x 5.2 x 2.4cm), 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adaptor.
Max. Data Rate - 1.65Gbps
HDCP & HDMI 1.3 Compliant
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable
Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable
Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat723 cable
Cable - For optimum range and performance, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat723 cables
Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges
Passes EDID (Extended Display Identification Data)
Status LED - Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached
Power Connect System - A single connection to the transmitter powers the receiver
Ultra-Compact Pico TOOLS - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter