The Hall Research UVA-16X transmission system is comprised of one Rack-Mount Sender unit and one or more Receiver units (Sold Separately). The basic sender can transmit Video along with line level audio.
The sender converts the video inputs and audio signals into a format that can be transmitted using a single inexpensive and commonly available Unshielded Twisted Pair (UTP) cable with RJ45 connectors. Both UTP and STP (shielded) cables can be used. In addition you can use Cat5, 5e, 6, or higher. However, for runs of over 250 feet, Hall Research recommends using “Skew-free” or “Zero-skew” Cat5 cables for best performance. At the receiving (remote) end, a compatible receiver (sold separately) is used to convert the UTP signal back to VGA and audio.
The product is housed in a 2 RU, 19” Rack mount enclosure and has connectors for up to 16 video inputs and 3.5 mm jacks for audio inputs, as well as multiple RJ45 output connectors for connection to the remote systems.
The RJ45 outputs on the Sender can drive Cat5 LAN cables to 1000 feet (305 meters) with little to no degradation of video quality depending on resolution of the VGA signal. The receiver can compensate for video signal losses in long cable runs.
Hall Research can also supply models with less than 16 outputs and that combine the features of the UV1-S-16X, UVA-16X and the UV232-16X giving you a flexible combination of Power, Audio and RS-232.
Distribute 16 Video Sources in one easy to use rack mount unit to remote locations
Supports resolutions up to 1600x1200 at any refresh rate and HD resolutions up to 1080p
Amplifies the signal for clean and crisp transmission using HRT's proven technology
Drives standard CAT5 cables up to 500 feet
Transmit video and Power signals on one cable
Built-In Universal Power Supply
2RU, 19" Rack Mount Enclosure
Perfect for Matrix Racks and Digital Signage