Mobile projector cart features 33' h top shelf and pull out notebook shelf, which can be set at 25", 27" or 29" sitting heights. Includes large cord management bin. Cart is 32" w x 24" deep.
Feature 18-gauge steel top and bottom shelves and connect to the legs with 13-gauge steel mounting brackets and 1/4" square head bolts and hex nuts.
Pull out shelves are 18-gauge steel. ECILS1, ECILS15 and ECILS3 top and bottom shelves are 32"W x 24"D.
The ECILS3 top shelf is height adjustable from 31-1/4" to 39-1/4" at the time of assembly in 1" increments.
ECILS3 also includes a 32"W x 24"D middle shelf and the bottom shelf is enclosed inside a cabinet.
The ECILS2 top and bottom shelves are 24"W x 18"D.
Pull Out Shelves
Pull out shelves are constructed from 18-gauge steel.
Pull out shelves on the ECILS1, ECILS15 and ECILS2 may be set at a seated 25", 27" or 28"H or a standing 33-1/2", 35-1/2" or 37-1/2"H.
The ECILS3 pull out shelf mounts to the bottom of the adjustable top shelf and will always be 4" below the top shelf height with 2" height clearance when closed.
Pull out shelves are 13"d and designed for use with a notebook computer and mouse.
Pull out shelves will not support heavier equipment.
Shelves pull out on smooth rolling glides.
Legs And Cabinets
Legs are 18-gauge, 1" square tubular steel that mount directly to the top and bottom shelves.
ECILS3 middle shelf also mounts directly to the leg assemblies.
Each leg has a hard plastic caster insert mounted in the bottom of the tube for caster attachment.
The ECILS3 features a lower cabinet assembly that is constructed from 20-gauge steel and is perforated on all sides to ventilate electronics.
Cabinet features a rear grommet hole for cord management and dual front doors that secure with a key lock, two keys provided.
Locking storage cabinet is 23"D by 30"W, cabinet doors are 12"H.
Cord Management Bin - ECILS1/ECILS15 ONLY
The ECILS1 and ECILS15 have cord management bins that double as a modesty panel and is 4-1/2"D x 10"H and run the width of the cart.
The ECILS3 uses the lower cabinet for cord management.
The ECILS2 does not include cord management.
Cabinet - ECILS3 ONLY
The ECILS3 and ECILS3FF feature a lower cabinet that key locks for security. Two keys are included.
The cabinet side and top panels have been perforated to ventilate equipment when in use and the back panel includes a set of mounting holes that accommodate a 4-outlet electrical unit or a 10-outlet electrical unit.
10-outlet electrical unit is included with the ECILS3FF.
Cabinet interior is 32"W x 23-3/4"D x 15-7/8"H. Doors have 14"H clearance.
All data projector carts feature 4" "Quiet Glide" industrial grade stem casters.
All casters swivel and two are locking.
The ECILS1 and ECILS15 may be equipped with a 4-outlet electrical unit with overload protection, on/off switch and 20' power cord.
The ECILS3 may be equipped with a 10-outlet electrical unit with overload protection, on/off switch and 20' power cord.
The ECILS2 may be equipped with a 3-outlet electrical unit with 20' power cord and built in winder.
All Data Projector Carts are constructed using "prime" steel that has a 25% to 35% post-consumer recycled steel content.
Steel components are finished in a powder paint that is reclaimable and greatly reduces volatile organic compounds.
The carts steel components are fully recyclable at the end of the product lifecycle.
Carts are entirely manufactured in the United States reducing the carbon footprint compared to carts imported from overseas.
The ECILS series of data projector carts are certified by the GREENGUARD Environmental Institute to meet the GREENGUARD Children & Schools Indoor Air Quality standards.
Made In America
All Data Projector Carts are proudly made in one of our Chicago area manufacturing facilities using union labor.