Welcome to Projector SuperStore Log In or Register

NARROW YOUR RESULTS
What item is right for you?
Ask one of our Experts!
1.888.525.6696
or

DisplayPort Cables

DisplayPort is a digital display interface primarily used to connect a video source to a display device such as a computer monitor, though it can also be used to carry audio, USB, and other forms of data. 2560 x 1600 (WQXGA resolution) is supported over all 2-meter “DP Certified” cables. Some cables, due to their design, may be capable of supporting 2560 x 1600 resolution over lengths longer than 2 meters.

DisplayPort was designed to replace VGA, DVI, and FPD-Link. Backward compatibility to VGA and DVI by using active adapters, enables users to use DisplayPort fitted video sources without replacing existing display devices.

DisplayPort is the first display interface to rely on packetized data transmission, a form of digital communication found in other technologies like Ethernet, USB, and PCI Express. It allows both internal and external display connections, and unlike legacy standards where differential pairs are fixed to transmitting a clock signal with each output, the DisplayPort protocol is based on small data packets known as micro packets which can embed the clock signal within the data stream. The advantage is a lower number of pins to achieve higher resolutions. The use of data packets also allows DisplayPort to be extensible, meaning additional features can be added over time without significant changes to the physical interface itself.

DisplayPort can be used to transmit audio and video simultaneously, but each one is optional and can be transmitted without the other. The video signal path can have six to sixteen bits per color channel, and the audio path can have up to eight channels of 24-bit 192 kHz uncompressed PCM audio or can encapsulate compressed audio formats in the audio stream. A bi-directional, half-duplex auxiliary channel carries device management and device control data for the Main Link, such as VESA EDID, MCCS, and DPMS standards. In addition, the interface is capable of carrying bi-directional USB signals.

The DisplayPort signal is not compatible with DVI or HDMI. However, Dual-Mode DisplayPorts are designed to transmit a single-link DVI or HDMI 1.2/1.4 protocol across the interface through the use of an external passive adapter that selects the desired signal and converts the electrical signaling from LVDS to TMDS. Analog VGA and dual-link DVI require powered active adapters to convert the protocol and signal levels, and do not rely on Dual-Mode. VGA adapters are powered by the DisplayPort connector, while dual-link DVI adapters may rely on an external power source.

The DisplayPort connector can have one, two, or four differential data pairs (lanes) in a Main Link, each with a raw bit rate of 1.62, 2.7, or 5.4 Gbit/s per lane with self-clock running at 162, 270, or 540 MHz. Data is 8b/10b encoded where each eight bits of information is encoded with a ten-bit symbol. So the effective data rates after decoding are 1.296, 2.16, and 4.32 Gbit/s per lane (or 80% of the total).




Showing 1-27 of 27 items