Welcome to Projector SuperStore Log In or Register

Weight:

2 .lbs

Warranty:

3 Years

Creston Electronics MP-AMP30 Media Presentation Audio Amplifier, Compact Surface-Mountable Design

The Crestron MP-AMP30 provides a convenient, low-cost audio amplifier solution for a variety of applications.

BRAND : Crestron

Part No : MP-AMP30

CONDITION : New

Your Price: $199.99

QTY:

The Crestron® MP-AMP30 provides a convenient, low-cost audio amplifier solution for a variety of applications. A perfect complement to the entire Media Presentation line from Crestron, it features a compact surface-mountable design that installs virtually anywhere without requiring an equipment rack. The MP-AMP30 meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space, such as above a suspended ceiling.

High-efficiency Class D circuitry delivers 15 Watts per channel to drive one or two pairs of 8 Ohm speakers, or a single pair of 4 Ohm speakers, making it ideal to support stereo speakers at the front of a room or mono speakers in the ceiling. Mono-summed operation is enabled by changing two jumpers on the front panel.

Refined, reliable operation is ensured thanks to pop-free turn-on circuitry and electronic short-circuit and overload protection. An energy-saving design achieves optimum efficiency under load, and the amplifier powers down automatically when no input signal is detected for more than 5 minutes, reducing overall power consumption and heat as part of a green system design. The amplifier quickly powers back on the instant an input signal is detected. Its extruded aluminum housing is both attractive and effective at dissipating heat, affording a silent running design without cooling fans.

Installation and setup of the MP-AMP30 is simple. Detachable output connectors facilitate the termination of speaker wiring up to 16 gauge. RCA inputs connect directly to the line output of a video projector or display, audio processor, mixer, or AV switcher. Rotary controls provide for adjusting the overall speaker volume, as well as bass and treble. For quiet environments, loudness compensation is employed by setting the volume control below the center detent position.

Key Features-

Compact surface mount power amplifier

15W per channel into 8 or 4 Ohms

Stereo or mono-summed operation

High-efficiency Class D topology

Energy saving design reduces power consumption when idle

Convection cooled for noiseless operation

Simple volume, bass, and treble adjustments

Built-in loudness contour circuit

Electronic short-circuit and overload protection

Detachable terminal block speaker connections

Unbalanced RCA line inputs, 3ft cable included

Manufacturer:

Crestron

Part No:

MP-AMP30

Weight:

2 .lbs

Ship Weight:

2 .lbs

Warranty:

3 Years

Width

99.3139 mm

Audio - Frequency Response

20Hz to 20kHz ±0.5dB

Maximum Frequency Response (Bandwidth)

20000.0000 Hz

Operating Temperature (Minimum)

5 C

Connectors - Top Panel, AUDIO OUT 8 Ohms

(2) 2-pin 3.5mm detachable terminal blocks;
Left & right channel speaker-level audio outputs, Connector accepts 16 AWG maximum, 15W Output Power per channel at 8 or 4 Ohms

Connector - PWR 24V DC 2.0A

(1) 2.1mm barrel DC power jack, 24V DC power input, (PW-2420RU power supply included)

Minimum Frequency Response (Bandwidth)

0.0200 kHz

Total Harmonic Distortion + Noise (THD+N)

0.7 %

Depth

36.3220 mm

Operating Temperature (Maximum)

104 F

Operating Temperature (Minimum)

41 F

Control & Indicator - Bass

Rotary low frequency boost/cut adjustment, flat at center detent

Enclosure - Type

Freestanding or surface mount

Depth

1.43 in (37 mm)

Height

148.5899 mm

DC Voltage

24 Volts

Audio - Treble Gain Range

±15dB at 10kHz

Audio - Output Power

15W per channel at 8 or 4 Ohms

Control & Indicator - ST, MO

Mode selection jumpers, select stereo or mono-summed operation

Housing Type

Aluminum

Humidity

10% to 90% RH (non-condensing)

Audio - Bass Gain Range

±15dB at 100Hz

Minimum Frequency Response (Bandwidth)

20 Hz

Audio - Input Volume Range

-55 to +20 dB

Audio - Loudness

Active at volume settings below center detent

Control & Indicator - VOL

Rotary input level adjustment

Width

3.91 in

Heat Dissipation

5.75 BTU/Hr

Product Weight

0.335 kg

Maximum Frequency Response (Bandwidth)

20 kHz

Enclosure - Chassis

Aluminum w/polycarbonate label overlay and (4) integral mounting flanges

Control & Indicator - Power

(1) green LED, indicates operating power supplied from external power supply

Depth

1.43 in

Height

5.85 in

Power Consumption

2A at 24V DC (PW-2420RU power supply included)

Audio - S/N Ratio

75dB, 20Hz to 20kHz A-weighted

Operating Temperature (Maximum)

40 C

Control & Indicator - Treble

Rotary high frequency boost/cut adjustment, flat at center detent

Height

5.85 in (149 mm)

Width

3.91 in (100 mm)

Audio - THD+N

0.7%, 20Hz to 20kHz

Product Weight

0.7385 lbs

Connector - Bottom Panel - Audio In

(2) RCA female, unbalanced stereo line-level audio input, 2 Vrms Maximum Input Level, 18k Ohms Input Impedance, 3ft (0.9m) stereo RCA-RCA cable included