The KVM Over IP Switch provides convenient, remote KVM access and control via LAN or internet. Control your computer or servers from another country just as easily as you can from your desk! This device combines digital remote KVM access via IP networks with comprehensive and integrated system management.The KVM Over IP Switch captures, digitizes, and compresses a video signal and transmits it with keyboard and mouse signals to and from a remote computer. This is a non-intrusive solution for remote access and control. Remote access and control software run on embedded processors only, not on mission-critical servers, so there is no interference with server operation or impact on network performance.This switch supports PS/2 keyboard/mouse consoles and HD15 video output, and will automatically detect the current video mode of the console. However manual finetuning is recommended to receive the best video quality. Video streams up to 110 MHz dot clock are accepted. This results in a screen resolution of 1280 x 1024 pixels with a frame rate of 60 Hz.PC Port Connectors: Two PS/2 Female, One HD 15-pin VGA Female, One USB Type B FemaleConsole Port Connectors: Two PS/2 Female, One HD 15-pin VGA FemaleRemote Port Connectors: One DB9 Serial Male, One RJ45 (8P8C) Female (LAN port)Please Note: 10BASE-T ethernet uses Category 3/4/5/5E/6 UTP while 100BASE-T ethernet uses Category 5/5E/6 UTP.