Welcome to Projector SuperStore Log In or Register

Weight:

5 .lbs

HRT UVB1-CP Component Video Over Cat5 Transmitter

HRT UVB1-CP SD/HD Component Video Over Cat5 5 Transmitter Kit - Can Transmit up to 1000 Feet!

BRAND : Hall Research

Part No : UVB1-CP

CONDITION : New

Your Price: $189.05

THIS ITEM QUALIFIES FOR FREE SHIPPING!

QTY:

Description

This product is used to boost & extend a standard or HDTV Component Video (YPbPr) signal on Cat5 cable up to 1,000 ft.

The kit includes a sender (UVB1-CP-S) and a receiver (UVB1-CP-R) together with high quality cables for both ends. A single power supply is also provided that can be plugged to either end.

Unlike other passive Baluns this device is active and boosts the signal using wide bandwidth (450 MHz) differential (balanced) amplifiers for an unprecedented sharp and clean image.

The unit provides Ground-loop Isolation (GLI) and RFI (radio frequency interference) immunity to prevent 60 cycle video hum or distortion. Most competing Baluns provide no common mode rejection at low frequencies and are subject to facility grounding issues and noise pickup.

The active design matches the impedance of the UTP cable perfectly at all frequencies so that there is no image ghosting. Ghosting is a major issue with competing passive Baluns transmitting HD signals.

Kit Contents

Features

  • Transmits component video (YPbPr) over CAT 5 cable
  • Up to 1000 feet (depending on the resolution)
  • Only one power supply required
  • Wide bandwidth differential amplifiers for unprecedented sharp and clean image
  • Ground-loop Isolation (GLI) and RFI (radio frequency interference) immunity
  • Active design impedance matching for no image ghosting
Specifications
  • Standards: Analog Component Video YPbPr or RGB signals with sync-on-green
  • Resolution: All Standard TV and HDTV from 480i to 1080p
  • Video Level: 1.0 volt p-p on Y and 0.7 v p-p on Pb and Pr
  • Bandwidth: 20 Hz to 450 MHz
  • Common Mode Noise Rejection: 100 dB @ 60 Hz, 70 dB @ 1 MHz, 50 db @ 10 MHz
  • Max Distance: Up to 1000 ft. (305 meters) @ 480i or 576i
    Up to 750 ft (229 meters) @ 480p or 576p
    Up to 500 ft (152 meters) @ 720p or 1080i
    Up to 300 ft (91 meters) @ 1080p
  • Temperature: Operating: 32 to 122 Deg F (0 to 50 Deg C)
    Storage: -40 to +185 Deg F (40 to +85 Deg C)
  • Enclosure: Enclosure Black Plastic ABS-94VO, UL File#56070
  • MTBF: 100,000 hours (calculated estimate)

     

Transmits component video (YPbPr) over CAT 5 cable

Up to 1000 feet (depending on the resolution)

Only one power supply required

Wide bandwidth differential amplifiers for unprecedented sharp and clean image

Ground-loop Isolation (GLI) and RFI (radio frequency interference) immunity

Active design impedance matching for no image ghosting

Manufacturer:

Hall Research

Part No:

UVB1-CP

Weight:

5 .lbs

Ship Weight:

6 .lbs

Bandwidth

20Hz to 450MHz

Enclosure

Black Plastic ABS-94VO, UL File#56070

Resolution

All Standard TV and HDTV from 480i to 1080p

Storage Temperature

-40 to +185 °F (40 to +85°C)

MTBF

100,000 hours (calculated estimate)

Video Level

1.0 volt p-p on Y and 0.7 v p-p on Pb and Pr

Standards

Analog Component Video YPbPr or RGB signals with sync-on-green

Transmission Range

1000 ft

Transmission Range

30479.9990 cm

Operating Temperature (Maximum)

122 F

Operating Temperature (Maximum)

50 C

Operating Temperature (Minimum)

0 C

Operating Temperature (Minimum)

32 F

Common Mode Noise Rejection

100dB at 60Hz, 70dB at 1MHz, 50dB at 10MHz